FH500J Horizontal Machining Center


Overview

The FH500J is a compact, high-speed horizontal machining center featuring a 15,000 RPM spindle, tool-to-tool cycle time of .9 seconds, and a rapid feedrate of 2,362 ipm (60 m/min).


Warming Up is for the Competition

Toyoda’s patented bearing preload allows machines to begin cutting when they are turned on – no warm-up time required. This same technology allows our machines to run 24/7, without worrying about overheating during production.


Increase Uptime and Keep Production Moving

Increase uptime with Toyoda’s patented replaceable spindle taper. Instead of replacing the entire spindle, switch out the taper and resume production.


Laying Low

Toyoda’s column is a unique design that has a low center of gravity. This increased stability assists in providing rigid and precise machining.


Motion Detected

Toyoda's proprietary thermal displacement sensors adjust for ballscrew heat expansion during machining. This technology maintains your tight tolerances for each and every cut.

Solid Construction

30 HP, 15,000 RPM CAT 40 Spindle

Specifications

Pallet Size 19.68" x 19.68" (500 mm x 500 mm)
Table Index Full NC table (360,000 positions)
X-axis Travel (column) 28.74” (730 mm)
Y-axis Travel (spindle head) 28.74” (730 mm)
Z-axis Travel (work table) 33.46” (850 mm)
Maximum Work Load on the Pallet 1,540 lb (700 kg)
Spindle Drive Motor  30 HP (22 kW) for 15 min. / 25 HP (18.5 kW) cont.
Spindle Output Torque 123 ft-lb (167 Nm)
Spindle Taper CAT40
Spindle Speed 15,000 RPM
Spindle Type Direct drive
Rapid Feedrate (X, Y, and Z axes) 2,362 ipm (60 m/min)
Tool Storage Capacity 40 Standard (60, 119 Optional)
Standard Floor Space 91.73" x 178.35" (2,330 mm x 4,530 mm)
Standard Net Weight 29,700 lb (13,500 kg)

 

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Request a Quote

First
Last
Company
Address
City
State
Zip
Email